AEROCUT BROACH ARTICLE

by Maria Baker,

Broaching is a machining process that uses a toothed tool, a broach, to remove material.

AEROCUT KEYWAY broaches quickly, easily and economically produce keyways in any sort of job.

An important feature of AEROCUT broaches is they are TiN coated at no extra cost.

Titanium Nitride (TiN) is applied as a thin coating to harden and protect cutting surfaces.

AEROCUT push-type KEYWAY broaches come in imperial and metric sizes and are supplied complete with shims.

Imperial (inch) sizes range from 1/16” up to 1”

Metric sizes range from 2mm up to 25mm

AEROCUT BROACH AND SHIMS

AEROCUT BROACH AND SHIMS

Collared or plain bushes are available for all bore sizes.

SQUARE BROACHES

Imperial (inch) sizes range from 1/8” to 1”

Metric sizes range from 4mm to 25mm

HEXAGONAL BROACHES

Imperial (inch) sizes from 1/8” to 1”

Metric sizes from 4mm to 25mm

KEYWAY BROACH SETS contain the most common keyway metric or imperial (inch) broaches and a range of bushes packed in varnished wooden boxes.

BROACH SET

BROACH SET